Description
The system is fully automated, sensors are loaded from magazine in strip format and cut into singles, dimensionally checked, and loaded into JEDEC tray. They are then transported by conveyor into the 4-zone washing system: solvent wash, water rinse, DI water rinse then hot air drying and unload.Configuration
Fully automated laser cutting system developed to cut fingerprint sensors from strip format into single sensors then clean to remove residues from cutting process. 355nm 40W UV laser manufactured by Coherent Inc. Scanlab laser head Overall size; 11m(L)x1.45m(w)x1.9m(H) Weight 10,000kg Final Cut product size tolerance ±50um (>1.33Cpk) – System accuracy ±10um Magazine fed – Strip loading Automatic dimension checking of cut product – overall size and cut centralisation Reject to JEDEC tray Cut products loaded into JEDEC tray Bad mark scanning and from strip map – reject sensors not cut Waste strip unload and removal High volume fume extraction system Throughput >1.6K Pcs / Hr Solvent or Water cleaning system to remove laser ablated material from sensor surfaces (Uses flux cleaning solvent LCT-601B in current configuration for optimal cleaning performance).OEM Model Description
LasersDocuments
No documents
INTELUME
SCM-A320A
CATEGORY
Laser
Last Verified: Over 30 days ago
Key Item Details
Condition:
Used
Operational Status:
Unknown
Product ID:
93350
Wafer Sizes:
Unknown
Vintage:
Unknown
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
Description
The system is fully automated, sensors are loaded from magazine in strip format and cut into singles, dimensionally checked, and loaded into JEDEC tray. They are then transported by conveyor into the 4-zone washing system: solvent wash, water rinse, DI water rinse then hot air drying and unload.Configuration
Fully automated laser cutting system developed to cut fingerprint sensors from strip format into single sensors then clean to remove residues from cutting process. 355nm 40W UV laser manufactured by Coherent Inc. Scanlab laser head Overall size; 11m(L)x1.45m(w)x1.9m(H) Weight 10,000kg Final Cut product size tolerance ±50um (>1.33Cpk) – System accuracy ±10um Magazine fed – Strip loading Automatic dimension checking of cut product – overall size and cut centralisation Reject to JEDEC tray Cut products loaded into JEDEC tray Bad mark scanning and from strip map – reject sensors not cut Waste strip unload and removal High volume fume extraction system Throughput >1.6K Pcs / Hr Solvent or Water cleaning system to remove laser ablated material from sensor surfaces (Uses flux cleaning solvent LCT-601B in current configuration for optimal cleaning performance).OEM Model Description
LasersDocuments
No documents