Description
No descriptionConfiguration
Temperature Cycle Method Temperature Cycle Method: Damper switching system for cold air and heat (Stop system for testing) Usage Examples: Temperature cycle test for two zones or three zones Performance Testing Temperature: Temperature Range: Low Temperature: -65°C to 0°C High Temperature: +60°C to +200°C Temperature Fluctuation Range: ±0.5°C Temperature Gradient: 10°C/min Test Temperature Stability Time: Rise: 65°C / 30 min Fall: -65°C / 30 min No Load Transition Time: Between High and Low Temperature Zones: 5 min Between Pre-heating Zone and Test Zone: 150°C / 30 min Test Sample Weight: Plastic mold IC5.0 kg Control Sensor: Thermocouple sensor Performance in Each Zone: Low Temperature Zone: Temperature Stability Time/Recovery Time: -80°C to 0°C, Approx. 70 min (Constant Temp. -75°C) High Temperature Zone: Temperature Stability Time/Recovery Time: +60°C to +225°C, Approx. 15 min (Constant Temp. +175°C) Pre-heating Zone: Set Temperature Range: +5°C to +30°C Ambient Temperature for Testing: +5°C to +35°C Main Body Testing Chamber Dimensions (W x H x D): 700 x 500 x 600 mm Body Dimensions (W x H x D): 1480 x 1940 x 1670 mm (Including protruding parts) Weight: Approx. 1280 kg Test Sample Shelf Weight Capacity: 100 kg (even distribution) Number of Test Sample Shelves: 3 shelves Test Window Weight: 7.5 kg/piece Test Window: Half mirror type / swing-open window Measurement Port: 30 mm x 100 mm rectangular measurement holes (one on each side) Main Features Temperature Controller: Control Method: PID temperature control Temperature Control Method: ECO mode (learning-based control for pre-heating and cooling) Operation Method: LCD touch panel and key input Display Method: LCD graphical display Display Resolution: ±1°C Program Memory: MAX 30 patterns (PROGRAM NO. 1~NO.30) Temperature Cycle Settings: MAX 9999 cycles Additional Features: Starter (compressor, fan), automatic start, reset, automatic power monitor, test start time display, temperature cycle display, fault history display, overheat protection display, test progress status display, test end notification, cycle end notification, test mode switching, reset and cycle count reset function, temperature deviation, remaining time output, timer signal output (3 points), abnormality detection, test stop due to device malfunction, trouble message display, and emergency stop button. Temperature Sensor: Pt100Ω (JIS C 1604) Cooling Path Cooling Method: Two-stage compression Refrigeration Machine: Water-cooled refrigeration compressor (10 HP x 2) Refrigerant: R-404A and R-23 Cooling Device: Scroll-type freezer Air Sending Device: Blower Heating Path Heating Device: Heater Protection Devices Safety Devices: Overheat protection, heater single-phase protection, compressor overheat protection, water chiller temperature abnormality detection, high/low pressure abnormality protection, fan overheating detection, air circulation abnormality detection, test sample protection for high temperature, cooling water cutoff protection, damper drive system protection, filter clogging detection, and air damper safety. Other safety devices include room temperature alarm, test sample protection, power failure protection, outer shell fuse, catalog fuse, etc. Primary Equipment Power Supply: Voltage: AC 200V, 3-phase, 50/60Hz, voltage fluctuation ±10% Max Apparent Power: 48 KVA Main Breaker Current: 138 A Leakage Breaker: 81 A Cooling Water Supply (for cooler): Cooling Water Temperature: 7°C (winter) / 32°C (summer) Piping Connection Diameter: 1" / 4B Cooling Water Flow Rate: 0.2~0.5 Cooling Water Pressure: 0.4~0.7 MPa for air cooler Water Supply Port Size: Main body outer diameter 66 mm, air cooler connection outer diameter φ 9 mm Additional Equipment Drain Pipe (for cooling water collection, etc.) Test Sample Temperature Measurement Device: 2 units Temperature Measurement Terminal Board: 2 units Instruction Manual: 1 copy External Finishing Paint Color: Light grayOEM Model Description
None ProvidedDocuments
No documents
ETAC
NT2031W
Verified
CATEGORY
Environmental Chambers
Last Verified: 22 days ago
Key Item Details
Condition:
Used
Operational Status:
Unknown
Product ID:
115813
Wafer Sizes:
Unknown
Vintage:
Unknown
Have Additional Questions?
Logistics Support
Available
Money Back Guarantee
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
ETAC
NT2031W
CATEGORY
Environmental Chambers
Last Verified: 22 days ago
Key Item Details
Condition:
Used
Operational Status:
Unknown
Product ID:
115813
Wafer Sizes:
Unknown
Vintage:
Unknown
Have Additional Questions?
Logistics Support
Available
Money Back Guarantee
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
Description
No descriptionConfiguration
Temperature Cycle Method Temperature Cycle Method: Damper switching system for cold air and heat (Stop system for testing) Usage Examples: Temperature cycle test for two zones or three zones Performance Testing Temperature: Temperature Range: Low Temperature: -65°C to 0°C High Temperature: +60°C to +200°C Temperature Fluctuation Range: ±0.5°C Temperature Gradient: 10°C/min Test Temperature Stability Time: Rise: 65°C / 30 min Fall: -65°C / 30 min No Load Transition Time: Between High and Low Temperature Zones: 5 min Between Pre-heating Zone and Test Zone: 150°C / 30 min Test Sample Weight: Plastic mold IC5.0 kg Control Sensor: Thermocouple sensor Performance in Each Zone: Low Temperature Zone: Temperature Stability Time/Recovery Time: -80°C to 0°C, Approx. 70 min (Constant Temp. -75°C) High Temperature Zone: Temperature Stability Time/Recovery Time: +60°C to +225°C, Approx. 15 min (Constant Temp. +175°C) Pre-heating Zone: Set Temperature Range: +5°C to +30°C Ambient Temperature for Testing: +5°C to +35°C Main Body Testing Chamber Dimensions (W x H x D): 700 x 500 x 600 mm Body Dimensions (W x H x D): 1480 x 1940 x 1670 mm (Including protruding parts) Weight: Approx. 1280 kg Test Sample Shelf Weight Capacity: 100 kg (even distribution) Number of Test Sample Shelves: 3 shelves Test Window Weight: 7.5 kg/piece Test Window: Half mirror type / swing-open window Measurement Port: 30 mm x 100 mm rectangular measurement holes (one on each side) Main Features Temperature Controller: Control Method: PID temperature control Temperature Control Method: ECO mode (learning-based control for pre-heating and cooling) Operation Method: LCD touch panel and key input Display Method: LCD graphical display Display Resolution: ±1°C Program Memory: MAX 30 patterns (PROGRAM NO. 1~NO.30) Temperature Cycle Settings: MAX 9999 cycles Additional Features: Starter (compressor, fan), automatic start, reset, automatic power monitor, test start time display, temperature cycle display, fault history display, overheat protection display, test progress status display, test end notification, cycle end notification, test mode switching, reset and cycle count reset function, temperature deviation, remaining time output, timer signal output (3 points), abnormality detection, test stop due to device malfunction, trouble message display, and emergency stop button. Temperature Sensor: Pt100Ω (JIS C 1604) Cooling Path Cooling Method: Two-stage compression Refrigeration Machine: Water-cooled refrigeration compressor (10 HP x 2) Refrigerant: R-404A and R-23 Cooling Device: Scroll-type freezer Air Sending Device: Blower Heating Path Heating Device: Heater Protection Devices Safety Devices: Overheat protection, heater single-phase protection, compressor overheat protection, water chiller temperature abnormality detection, high/low pressure abnormality protection, fan overheating detection, air circulation abnormality detection, test sample protection for high temperature, cooling water cutoff protection, damper drive system protection, filter clogging detection, and air damper safety. Other safety devices include room temperature alarm, test sample protection, power failure protection, outer shell fuse, catalog fuse, etc. Primary Equipment Power Supply: Voltage: AC 200V, 3-phase, 50/60Hz, voltage fluctuation ±10% Max Apparent Power: 48 KVA Main Breaker Current: 138 A Leakage Breaker: 81 A Cooling Water Supply (for cooler): Cooling Water Temperature: 7°C (winter) / 32°C (summer) Piping Connection Diameter: 1" / 4B Cooling Water Flow Rate: 0.2~0.5 Cooling Water Pressure: 0.4~0.7 MPa for air cooler Water Supply Port Size: Main body outer diameter 66 mm, air cooler connection outer diameter φ 9 mm Additional Equipment Drain Pipe (for cooling water collection, etc.) Test Sample Temperature Measurement Device: 2 units Temperature Measurement Terminal Board: 2 units Instruction Manual: 1 copy External Finishing Paint Color: Light grayOEM Model Description
None ProvidedDocuments
No documents