The Type 627D Baratron® is the RoHS-compliant version of the industry standard for stability
and accuracy. The Type 627D Baratron is temperature controlled to 45°C, accurate to 0.12%
of Reading and includes updated temperature control electronics to provide superior longterm stability and repeatability. Optional heater and temperature status LED/switches
indicate that the heater (which maintains the sensor temperature to 45°C) is in control. This
capacitance manometer is available in Full Scale ranges down to 20 mTorr (0.03 mbar) to
accommodate today’s lower process pressures.

MKS / NEWPORT / ORIEL

627D

The MKS Baratron® Type 622A, 626A, 627A, 628A, and 629A Absolute Pressure Transducers
are part of the MKS family of general purpose pressure transducers designed to provide accurate, reliable, and repeatable pressure measurements in the range from 1K Torr to as low as 0.05 Torr F.S. (627 and 629). These instruments operate with ±15 VDC (±5%) input @ 35 mA, 250 mA, or 500 mA, depending upon the unit, and provide 0 to 10 VDC output linear with pressure. All instruments expose only Inconel to the process permitting use with corrosive or dirty gases and eliminating contamination of the process with transducer materials. Measurements are independent of gas composition and all of the units have a minimum measuring range of four decades.

627A

The 1544-B DC-Coupled NIR Fiber-Optic Receiver is ideal for applications that require high sensitivity, high speed, and clean responses. It offers clean responses and 32-ps rise times making it well-suited for time-domain characterization of 10-Gbit/s components. Its high gain and well-behaved frequency response also make it useful for frequency-domain measurements.

1544-B

627A11TBC

627B11TBC1B

XPS-DRV02

918D-IG-OD1R

All Oriel Sol3A simulators are certified to IEC 60904-9 Edition 2 (2007), JIS 8904-9 2017, and ASTM E 927-10 standards for Spectral Match, Non-Uniformity of
Irradiance, and Temporal Instability of Irradiance. By convention, Class AAA is reported with the first letter representing Spectral performance, the second letter
Uniformity of Irradiance, and the third letter Temporal Stability. The Oriel Sol3A simulators all use a single lamp design to meet not one or two, but all three performance criteria without compromising the 1 SUN output power, providing true Class AAA performance. The Oriel Sol3A uses a black, non-reflective finish to minimize stray light and incorporates captive screws for all panels requiring user access to facilitate lamp replacement, alignment, and filter changes. Safety interlocks prevent inadvertent exposure to UV light. The Oriel Sol3A rugged design is backed by the Newport Corporation’s world wide organization.

Sol3A

TracQ Basic integrates Oriel monochromators and spectrographs with various detection instruments. Software prompts guide users through the measurement process. Instruments are controlled and scan parameters are set up through simple, intuitive dialog boxes. The front panel of the software allows users to monitor the instrument status, present wavelength, signal reading and the selected wavelength units. The Oriel TracQ Basic software is an instrument control package that includes data acquisition and processing. TracQ Basic allows users to acquire spectroscopic measurement data quickly and easily, without requiring any programming knowledge. TracQ Basic is true radiometry software, which enables users to acquire basic signal vs. wavelength measurements or use the built-in algorithms for spectroscopic measurements. Data acquisition and processing occur in real time. TracQ Basic includes many features, such as:

Monochromator grating selection
Automatic bandpass selection
Motorized filter selection
Wavelength unit selection
Wavelength offset
Output port selection
Monochromator shutter control
QE detector and preamplifier gain setups
Detector spectral responsivity file integration
Background subtraction

TracQ Basic

94062A 

Wavelength range is from 300 to 1100 nm, working distance is 50 mm, resolution is 5 nm (adjustable), and repeatability is <±0.5. The light source is a 250-W quartz tungsten halogen lamp. Operating temperature is from 0 to 40 °C, input voltage is from 90 to 264 VAC, input current is 15 A, and power consumption is 400 W.

MKS / NEWPORT / ORIEL

Overview

Active Listings

Total Products

Services

Top Products

627D

627A

1544-B

627A11TBC

List it with Moov and find the perfect buyer in no time at all.

All Products

See All Listings