Anritsu provides cutting-edge solutions for telecommunications technologies ranging from indoor coverage mapping in small wireless systems to spectrum analysis and over the air testing in large wireless networks. Our complete solutions are designed to meet your ever-changing market needs.

Optical Channel Selector For Switching Optical Signals

ANRITSU 

MN9601C

MS2028C

ME462B

MS2038C

Frequency Range: 0.001 to 3 GHz
Impedance: 50 Ohms
Return Loss: 26 dB
Input Connector: N(m)
Frequency Response: ±0.2 dB, <1 GHz ±0.3 dB, <3 GHz

5400-71N50

MS2037C 

G0306C

10 MHz - 40 GHz Synthesized Signal Generator

MG3694B

MN9662A

S820E-0740

69167B

Synthesized Signal Generator, 10MHz to 40GHz

68367C

69067B

All Optical Fiber Evaluation Functions in One Tester

MT9085

MS2781B

MP2110A

The VNA Master MS2027C has a 12-term error correction algorithm with a typical measurement speed of 350 μsec per point. It is suited for tuning filters in the field where multiple S-parameters often interact during tuning. The MS2027C can measure and display all 2-port S-parameters at once with a one-time connection to the Device Under Test (DUT).

MS2027C

G0306B

MP8931A

ML2488A

MG36221A

68369B

This system is a network analyzer use to measure transmission and reflection (external reflection bridges are also used)  characteristic of electronic parts and circuits over a frequency range of 10Hz to 300MHz. It have a 6.5-inch flat display (640 X 480 dots). This display is color LCD based on an active matrix drive system. 

MS4630B

SPECTRUM MASTER SPECTRUM ANALYZER: 100 KHZ TO 3.0 GHZ

MS2711D

PIM Master MW82119B Battery-operated, High Power Portable, Passive Intermodulation Analyzer with optional Cable and Antenna Analyzer

MW82119B

The Signal Quality Analyzer MP1800A is a modular type bit error rate tester (BERT). It has a built-in pulse pattern generator (PPG) for outputting high-quality, wideband multi-channel NRZ signals at 2.4 Gbit/s to 32.1 Gbit/s, an error detector (ED) with high input sensitivity, and a Jitter modulation source supporting Jitter Tolerance tests; it supports PAM4 modulation and is ideal for evaluating transmissions of external interfaces such as next-generation Ethernet.

MP1800A

Spectrum Master Handheld Spectrum Analyzer

MS2712E

MS2602A

MU181020A

Pulse Pattern Generator (PPG) Module; 2.4 Gbit/s to 28.1 Gbit/s

MU183020A

MF1604A

2 MHz to 6 GHz combined with 9 kHz to 6 GHz Spectrum Analyzer, less than 6 lbs, with resistive 8.4 inch daylight touchscreen, supports wireless service providers, contractors, and installers

S362E

MP1764A	

MT8852B

Anritsu's latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company's highest performance handheld spectrum analyzer. Exciting new features and options bring more value and speed to the user. 

- Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB. 
- Three Sweep Modes: improved sweep speed, up to 100 times faster
- Resolution and Video Bandwidths from 1 Hz to 10 MHz
- New triggering choices, including hysteresis, hold-off, and delay
- More zero-span capabilities including 10 MHz RBW & VBW
- Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice
- Choice of display options for readability: normal, black on white, night vision, color on white, or high contrast
- On-screen Interference Mapping as part of the Interference Analysis option
- LTE Measurements up to 20 MHz, plus support for Carrier Aggregation
- 30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal
- Burst detect captures 200 μs bursts the first time, every time
- PIM Hunting for finding external IM products

MS2720T

The MP1570A analyzer is designed for development, manufacturing, construction, maintenance, and inspection of SDH, SONET, PDH, and ATM equipment and networks. A variety of plug-in units and options are available that offer the flexibility to the users to configure various analysis systems for different applications.

MP1570A

MU183040B High Sensitivity ED

The Anritsu MU183040B/MU183041B High Sensitivity ED is a new plug-in module for MP1800A Signal Quality Analyzer, supporting multichannel BER measurements up to 32.1 Gbit/s. It extends the performance of the earlier A-type ED to offer world’s best Rx sensitivity 1) with the world’s fastest Auto Adjust 1) (auto-align of threshold level and phase points). The MU18304xB High Sensitivity ED supports simultaneous multichannel measurements of low-amplitude, low EYE Opening DUT outputs to achieve more-accurate, ideal signal quality analysis.

MU183040B

ME448B

2 MHz to 4 GHz, less than 6 pounds, with resistive 8.4 inch daylight touchscreen, supporting wireless service providers, contractors, and installers

S331E

MS2713E

3740A-V

MS2665C

MS2711B

3.2G Bit Error Rate Analyzer

The MP1632C digital data analyzer, a 3.2 Gb/s BERT that not only conducts bit error rate testing but can also measure burst signals and evaluate waveform quality. Featuring a wide frequency range of 10 MHz to 3.2 GHz, the MP1632C is an excellent tool in R&D and manufacturing of SONET/SDH systems, WDM components, G/bit Ethernet and Fiber Channel systems, as well as digital ICs. Combining a pulse pattern generator and error detector in one instrument, the MP1632C has strong analysis capability, including built in eye margin and eye diagram measurement functions. For further accuracy, the eye opening (margin) is shown as a function of bit error rate that is not supported by a digital oscilloscope. The built in pulse pattern generator outputs high quality data and clock waveforms.

MP1632C

The MS9001A/MS9001A1 offer level measurements from — 70dBm to + lOdBm with wide dynamic range (stray light level) of more than 40dB (MS9001A1) at ±lnm from the peak. Ghosts are virtually eliminated to give a clear picture of any DFB laser output spectrum. Anritsu's design enables a 0.3 second sweep for precise analysis of spectrum instability due to bias current and temperature changes in high-frequency modulation. They abo guarantee accurate level measurement (within 2dB) over a wider range (0.6—1.75am). The MS9001A/MS9001A1 quickly locate the key portion of any spectrum with an auto-range function, and can process peak search and peak-tocenter functions.

MS9001A1

The Anritsu MS4623B Vector Network Analyzer (VNA) is a high performance 2-port S-parameter measurement platform consisting of a single flexible source and ultra-linear receiver. Tha MS4623B vector network analyzer (VNA) engine provides all the necessary features to thoroughly characterize your RF components versus time, frequency and power.

MS4623B

MS9740A

MP2100A

SM6629

MT1000A is the All-in One field tester of B5 size excellent in operability, combined 10G / 100G Ethernet, OTN, SONET/SDH, OTDR, PTP and CPRI modules ,having the automating testing function.

MT1000A

The MU181040A is a plug-in module that can be built into a Signal Quality Analyzer Series mainframe. It can measure a variety of patterns within the operating frequency range, including PRBS, Data, Zero-Substitution, Mixed, and Sequence patterns.
Various option configurations are available for the MU181040A. This module is useful for research, development, and production of various types of digital communication equipment, modules, and devices.

MU181040A

3738A

MS4644A

MG3710A

MP1763B

The MS2036A VNA Master has an integrated 2-port vector network analyzer from 2 MHz to 6 GHz, spectrum analyzer from 9 kHz to 7.1 GHz, and power meter capabilities.

MS2036A

SM6630

The MA24106A power sensor is a USB power sensor that eliminates the need of a traditional power meter. It is a highly accurate, standalone instrument that communicates with a PC via USB. The power measurement capability of MA24106A is intended to mimic that of a traditional thermal (thermo-electric) power sensor with a wider dynamic range.

MA24106A

MF1603A

MN4697C

MP1763C

MP1570A1

Anritsu’s Field Master Pro MS2090A real time spectrum analyzer delivers performance never previously available in a compact, handheld instrument. With continuous frequency coverage from 9 kHz to 54 GHz, the Field Master Pro MS2090A is specifically designed to meet the test challenges of a full range of other wireless technologies in use today, including: 5G, LTE, wireless backhaul, aerospace/defense, satellite systems, and radar.

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

6" Fab For Sale from Moov - Click Here to Learn More

ANRITSU

Overview

Active Listings

Total Products

Services

Top ANRITSU Electronic Test

MS2028C

ME462B

MN9601C

MS2038C

List it with Moov and find the perfect buyer in no time at all.

All ANRITSU Electronic Test